Session x Teak Manual Pad - 8.25" Wooden Fingerboard Ledge, Acrylic Coping
- In stock, ready to ship
-
Fast Shipping from NY
-
Pro-Rider Tested
A wooden fingerboard manual pad, 8 1/4 inches long on a 4 1/8 inch wide platform, with matte acrylic coping running the full top edge in ivory and teal brick.
The coping is acrylic, not metal and not bare ply, so it slides fast, runs quiet, and still locks at the edge. This is the full size pad in the line, built as the anchor of a desk park: wide enough to roll onto at speed, low enough at 1 1/8 inches to manual across, square enough to grind end to end. If you want the travel size, that's the Pocket Manual Pad.
- Size: 8.25 x 4.125 x 1.125 in
- Coping: matte acrylic in ivory and teal brick, full length
- Platform: 4.125 in wide, land square instead of hunting an edge
- Deck height: 1.125 in, made for manuals
- Build: laser cut, glued, and hand sanded in Rochester, NY
Includes: 1 Manual Pad, fully assembled. Fingerboard not included.
Details
The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.
Materials and Wear
Baltic birch platform with acrylic coping we cut in house. The acrylic scuffs in as you ride it and slides better broken in. Wipe it with a dry cloth and skip solvents, they haze the finish.
Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the acrylic and skip solvents and polish, they haze the finish.
Teak Guarantee
Every Session x Teak piece is built by us in Rochester, which means it's backed by the Teak Guarantee: if it arrives damaged, arrives defective, or breaks within 90 days of delivery, we replace it or refund it. Reach out with a photo of the issue. Full guarantee details.
Frequently Asked Questions
Who makes Session x Teak obstacles?
Session Fingerboards is part of the Teak Tuning family, established in 2025. Every piece in the line is designed, laser cut, glued, and hand sanded start to finish in our Rochester, NY shop.
Is it solid wood?
The body is high grade Baltic birch plywood, laser cut and glued up in house. It's real wood all the way through, not a printed plastic shell, so the faces hold their shape session after session.
How is this different from the Pocket Manual Pad?
This is the full size anchor piece at 8.25 inches. The Pocket is the 6 inch travel version, and it stacks flush on top of this pad for a double layer.
Does it fit all fingerboards?
Yes. These are open riding surfaces scaled for standard fingerboards, so deck width doesn't matter: narrow old school decks, 32mm and 34mm standards, and 36mm and wider shapes all ride the same obstacles.
How does it wear over time?
Each material breaks in its own way. Bare birch scuffs and burnishes darker where you ride it, acrylic scuffs in and slides faster, and stainless steel polishes where you grind. All of it is wear, not damage, and the obstacle rides better for it.
Do I need to assemble anything?
No. Every obstacle ships fully assembled and padded from our Rochester, NY shop. Unbox it and ride.
What does the Teak Guarantee cover?
Replace or refund within 90 days of delivery for anything that arrives damaged or defective, or breaks in that window. Contact Teak Tuning with a photo, and see the full policy on our Teak Guarantee page.
Small Parts. Not suitable for children under the age of 14.
