How To Upgrade Your Fingerboard

Upgrading your fingerboard part by part lets you dial it in exactly how you like. The right deck, trucks, wheels, tape and tuning can make a big difference in how your board feels. Here's what to upgrade and what to look for in each part.

Quick answer

Upgrade the parts that matter most to you: a deck in the width and shape you like, trucks matched to its width, bearing wheels in the size and hardness that suit your style, new grip tape and Pro Duro Bubble Bushings in 51A, 61A or 71A. Not sure where to start? Our complete builder shows what fits as you pick.

1. Choose the right deck

Wooden fingerboard decks in different shapes

Your deck shapes your control, stability and overall feel. Most riders ride the standard popsicle shape, and we also make Boxy, Carlsbad Cruiser, Ohhh and Pool Party shapes. If you already ride, start from the width that feels comfortable. If you're new, 32mm is the standard and a great place to start. Our guides to deck width and deck shape go deeper.

2. Pick trucks that match

Fingerboard trucks

Trucks hold your wheels and let you turn and grind. Match the truck width to your deck width, or get as close as you can. A 32mm deck takes 32mm trucks.

3. Upgrade your wheels

Apex fingerboard wheels

Wheels make a big difference in how smooth your board rides. Think about size, hardness and shape. A lower durometer number feels softer and grippier, and a higher number feels harder and slides more easily.

4. Change your grip tape

Fingerboard grip tape

Grip tape keeps your fingers from slipping, and switching tape is a small upgrade that changes your control a lot. Foam tape is the most popular, and Pro Duro Grip Tape gives you a soft, super grippy silicone feel. Compare them all in our tape guide.

5. Change your tuning

Pro Duro Bubble Bushings

Tuning sits on the kingpin and decides how your trucks lean and turn. Pro Duro Bubble Bushings come in 51A (extra loose), 61A (classic loose, the same feel as our OG bubble bushings) and 71A (medium, tighter and steadier). O-Ring Kits are another affordable way to tune and color match.

6. Finishing touches

Add board rails to protect your graphic, riser pads for wheel clearance and nylon insert lock nuts so nothing comes loose. For setup ideas, our Instagram, @teaktuning, is full of setups from customers and team riders.

Want it all at once? Our completes with Apex Wheels come with upgraded parts, and the deck and truck widths in every Teak complete are already compatible.

FAQ

What should I upgrade first on my fingerboard?

Start with whatever you want to change most. Bearing wheels roll smoother, Pro Duro Bubble Bushings set how loose or tight your trucks turn, and new grip tape changes your control.

Do my trucks need to match my deck width?

Yes, or come as close as you can. A 32mm deck takes 32mm trucks.

What durometer wheels should I get?

A lower durometer feels softer and grippier, and a higher durometer feels harder and slides more easily. Our wheel durometer guide breaks it down.

Which bushings should I start with?

61A Pro Duro Bubble Bushings. They have the classic loose feel of our OG bubble bushings.


2 comments


  • Kolt

    If there is one thing that you could that you could upgrade on a on a Tech Deck to make it a better fingerboard what would it be


  • Remy

    Hey teak tunning I was hoping for you to send either some free boards or some foam grip tape to me I just started finger boarding 1 month ago and fell in love with I would be happy if you sent some free stuff I’m only ten years old and have a dream to be a fingerboard YouTuber my YouTube name is SKELLY BOARDING


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.