Session x Teak Picnic Table - 9.875" Wooden Fingerboard Obstacle, 5 Grind Edges
- In stock, ready to ship
-
Fast Shipping from NY
-
Pro-Rider Tested
A Baltic birch fingerboard picnic table, 9.875 inches long, with dual teal acrylic coping down the tabletop and both benches fully acrylic topped.
Most obstacles give you one edge. This gives you five. Coping runs the full length of both tabletop edges, and each bench is covered end to end, so you can grind the table, drop to a bench, and carry out the far side without ever leaving acrylic. It's long enough to build a line on rather than a single trick, and it looks just as good parked on a desk between sessions.
- Size: 9.875 x 6 x 2.75 in
- Coping: dual teal acrylic, full length of both tabletop edges
- Benches: both fully acrylic topped, grindable end to end
- Grind edges: five across one obstacle
- Build: laser cut, glued, and hand sanded in Rochester, NY
Includes: 1 Picnic Table, fully assembled. Fingerboard not included.
Details
The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.
Materials and Wear
Birch structure with acrylic across every surface you'd actually ride. The acrylic scuffs as you use it, which is wear, not damage. Store it flat so the benches stay square to the table.
Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the acrylic and skip solvents and polish, they haze the finish.
Teak Guarantee
Every Session x Teak piece is built by us in Rochester, which means it's backed by the Teak Guarantee: if it arrives damaged, arrives defective, or breaks within 90 days of delivery, we replace it or refund it. Reach out with a photo of the issue. Full guarantee details.
Frequently Asked Questions
Who makes Session x Teak obstacles?
Session Fingerboards is part of the Teak Tuning family, established in 2025. Every piece in the line is designed, laser cut, glued, and hand sanded start to finish in our Rochester, NY shop.
Is it solid wood?
The body is high grade Baltic birch plywood, laser cut and glued up in house. It's real wood all the way through, not a printed plastic shell, so the faces hold their shape session after session.
How many grind edges does it have?
Five: both tabletop coping edges plus both benches, which are acrylic topped end to end. You can run a whole line without leaving the obstacle.
Does it fit all fingerboards?
Yes. These are open riding surfaces scaled for standard fingerboards, so deck width doesn't matter: narrow old school decks, 32mm and 34mm standards, and 36mm and wider shapes all ride the same obstacles.
How does it wear over time?
Each material breaks in its own way. Bare birch scuffs and burnishes darker where you ride it, acrylic scuffs in and slides faster, and stainless steel polishes where you grind. All of it is wear, not damage, and the obstacle rides better for it.
Do I need to assemble anything?
No. Every obstacle ships fully assembled and padded from our Rochester, NY shop. Unbox it and ride.
What does the Teak Guarantee cover?
Replace or refund within 90 days of delivery for anything that arrives damaged or defective, or breaks in that window. Contact Teak Tuning with a photo, and see the full policy on our Teak Guarantee page.
Build the Park
Bracket the table with kickers and turn one obstacle into a plaza.
View the Kicker 2-Pack →Small Parts. Not suitable for children under the age of 14.
