Session x Teak Pocket Manual Pad - 6" Wooden Fingerboard Obstacle, 2 Heights
- In stock, ready to ship
-
Fast Shipping from NY
-
Pro-Rider Tested
A mini fingerboard obstacle in Baltic birch, 6 inches long and as low as 7/8 of an inch tall, with a matte acrylic coping edge that slides fast out of the box.
This is the travel size of our full size pad, and the smallest thing we make that still has real coping on it. It drops in a jacket pocket or a backpack sleeve, sits on a desk without taking it over, and gives you a genuine acrylic edge for slides and tech lines. It comes in two heights, Short Stack at 7/8 inch and Tall Stack at 1 1/8 inches.
- Footprint: 6 x 2.75 in
- Heights: available as Short Stack 7/8 in or Tall Stack 1.125 in
- Coping: matte acrylic in ivory and teal brick
- Stacks: sits flush on the full size Manual Pad for a double layer
- Build: laser cut, glued, and hand sanded in Rochester, NY
Includes: 1 Pocket Manual Pad in your chosen height, fully assembled. Fingerboard not included. The full size pad shown in scale photos is sold separately.
Details
The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.
Materials and Wear
Baltic birch under acrylic coping, at 6.5 ounces. The coping scuffs in with use and the slide gets quicker for it. It travels well, just don't leave it loose in a bag with your keys.
Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the acrylic and skip solvents and polish, they haze the finish.
Teak Guarantee
Every Session x Teak piece is built by us in Rochester, which means it's backed by the Teak Guarantee: if it arrives damaged, arrives defective, or breaks within 90 days of delivery, we replace it or refund it. Reach out with a photo of the issue. Full guarantee details.
Frequently Asked Questions
Who makes Session x Teak obstacles?
Session Fingerboards is part of the Teak Tuning family, established in 2025. Every piece in the line is designed, laser cut, glued, and hand sanded start to finish in our Rochester, NY shop.
Is it solid wood?
The body is high grade Baltic birch plywood, laser cut and glued up in house. It's real wood all the way through, not a printed plastic shell, so the faces hold their shape session after session.
Short Stack or Tall Stack?
Short Stack is 7/8 inch tall and rides like a curb. Tall Stack is 1 1/8 inches and matches the height of the full size Manual Pad. Same footprint and same coping either way.
Does it fit all fingerboards?
Yes. These are open riding surfaces scaled for standard fingerboards, so deck width doesn't matter: narrow old school decks, 32mm and 34mm standards, and 36mm and wider shapes all ride the same obstacles.
How does it wear over time?
Each material breaks in its own way. Bare birch scuffs and burnishes darker where you ride it, acrylic scuffs in and slides faster, and stainless steel polishes where you grind. All of it is wear, not damage, and the obstacle rides better for it.
Do I need to assemble anything?
No. Every obstacle ships fully assembled and padded from our Rochester, NY shop. Unbox it and ride.
What does the Teak Guarantee cover?
Replace or refund within 90 days of delivery for anything that arrives damaged or defective, or breaks in that window. Contact Teak Tuning with a photo, and see the full policy on our Teak Guarantee page.
Small Parts. Not suitable for children under the age of 14.
