Session x Teak Wall XL - 12.75" Wooden Fingerboard Wallride, Quarter Pipe
- In stock, ready to ship
-
Fast Shipping from NY
-
Pro-Rider Tested
The Wall XL is a double sided quarter pipe wall ride in Baltic birch, 6 inches tall, with a matte acrylic brick face on one side and flush stainless steel coping on the other.
Two faces, two different sessions. The steep face is skinned in a matte acrylic brick pattern we cut in house, and it makes a real sound when you ride across it. Turn it around and the transition runs up to a round stainless bar set flush with the deck, so you lock into a smith or a blunt without catching a lip. Both faces blend flat into the tabletop at the base, so you roll in instead of stalling on a seam.
- Size: 12.75 x 7.875 x 6 in
- Wallride face: custom matte acrylic brick pattern, flush mounted
- Coping: round stainless steel bar, flush with the deck
- Base: both faces run flat to the tabletop, roll in from either side
- Build: laser cut, glued, and hand sanded in Rochester, NY
Includes: 1 double sided wallride and transition ramp. Fingerboard not included.
Details
The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.
Materials and Wear
Baltic birch body, flush mounted acrylic, and a real stainless bar. The coping picks up a patina where you grind it and the acrylic scuffs in and rides faster. Wipe the acrylic with a dry microfiber and keep the whole piece out of humidity.
Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the acrylic and skip solvents and polish, they haze the finish.
Teak Guarantee
Every Session x Teak piece is built by us in Rochester, which means it's backed by the Teak Guarantee: if it arrives damaged, arrives defective, or breaks within 90 days of delivery, we replace it or refund it. Reach out with a photo of the issue. Full guarantee details.
Frequently Asked Questions
Who makes Session x Teak obstacles?
Session Fingerboards is part of the Teak Tuning family, established in 2025. Every piece in the line is designed, laser cut, glued, and hand sanded start to finish in our Rochester, NY shop.
Is it solid wood?
The body is high grade Baltic birch plywood, laser cut and glued up in house. It's real wood all the way through, not a printed plastic shell, so the faces hold their shape session after session.
What are the two faces?
One side is a steep wallride skinned in matte acrylic brick. The other is a transition running up to flush stainless steel coping. Same footprint, two different sessions.
Does it fit all fingerboards?
Yes. These are open riding surfaces scaled for standard fingerboards, so deck width doesn't matter: narrow old school decks, 32mm and 34mm standards, and 36mm and wider shapes all ride the same obstacles.
How does it wear over time?
Each material breaks in its own way. Bare birch scuffs and burnishes darker where you ride it, acrylic scuffs in and slides faster, and stainless steel polishes where you grind. All of it is wear, not damage, and the obstacle rides better for it.
Do I need to assemble anything?
No. Every obstacle ships fully assembled and padded from our Rochester, NY shop. Unbox it and ride.
What does the Teak Guarantee cover?
Replace or refund within 90 days of delivery for anything that arrives damaged or defective, or breaks in that window. Contact Teak Tuning with a photo, and see the full policy on our Teak Guarantee page.
Build the Park
Anchor one end of a line with the Wall, flow the other with the Shark.
View the The Shark →Small Parts. Not suitable for children under the age of 14.
