Apex Fingerboard Wheels - New Street 61D Urethane - Ultraspin - "Gumdrop"

The Colorway
Gumdrop is a medium bubblegum pink with a soft matte surface, and all four wheels come out the same flat tone with no pattern, shading, or swirl anywhere in the set. If you want one clean block of color under the deck rather than something that reads differently on every corner, this is the one in the family that does it. 61D is the softest urethane we blend, so it grips texture and rolls quiet.

What does 61D mean
61D is the softest urethane we pour, equivalent to 101A on the skateboard A scale. It grips like a real skateboard wheel, holds a line, and rides quiet.

Bearings and the Bearing Pocket
Ultraspin bearings are our free spin bearings: unshielded and dry, so the wheel spins long and loose off a flick. They're the classic fingerboard feel. The Bearing Pocket is a custom lock cast into the wheel that stops the bearing backing out unless you use a bearing press, so you can run the locknut fully tight without binding the roll.

Blend and Cast
Every Apex wheel in our urethane line is made in New York. We blend our own custom compounds and pour each wheel, the wheels are precision cut here in NY, and we press the bearings and pack every set in our Rochester shop.

Care

• Soft urethane squeaks on slides. You want the squeak.
• The face burnishes where it wears. The color stays, the texture smooths out.
• Don't soak the bearings. Water and cleaner strip the lubricant.

Teak Guarantee
All Apex wheels are backed by the Teak Guarantee, which covers items that arrive damaged, defective, or that break within 90 days of delivery: we replace or refund. Reach out with a photo of the issue. Full guarantee details.

What does 61D mean?
61D is the softest urethane we pour, equivalent to 101A on the skateboard A scale. It grips like a real skateboard wheel, holds a line, and rides quiet.

What is the D scale? How does it compare to skateboard wheel hardness?
We measure our compounds on the Shore D scale, which suits small cast wheels better than the skateboard A scale. As a reference point, our softest 61D rides like a 101A skateboard wheel; higher D numbers are harder and faster.

Do these fit all fingerboard trucks?
Yes. Apex wheels mount on standard fingerboard axles with no modification and fit all major trucks, including 29mm through 36mm and wider setups.

What comes in a set?
Four wheels with bearings already pressed in, a capped storage tube, and a Teak Tuning sticker. Deck and trucks aren't included.

Are Apex wheels made in the USA?
The urethane Apex line is made in New York: we blend our own custom compounds and pour each wheel, the wheels are precision cut in NY, and we press the bearings and pack every set in our Rochester shop. The bearings are the one imported component.

What does the Teak Guarantee cover?
Replace or refund within 90 days of delivery for anything that arrives damaged or defective, or breaks in that window. Contact Teak Tuning with a photo, and see the full policy on our Teak Guarantee page.