How To Assemble Your New Fingerboard

Got all the parts and not sure where to start? Putting a fingerboard together takes a few simple steps and a fingerboard tool. Follow this guide and you'll be riding in no time.

Quick answer

Tape the top of the deck and file the edges, poke the 8 truck holes through the tape, add a graphic wrap if you have one, set your bushings in the trucks, screw the trucks on with the kingpins facing each other, then put the wheels on with lock nuts. All you need is a deck, trucks, wheels, grip tape and a fingerboard tool.

What you need

  • A deck. Every Teak Tuning deck comes with a sheet of PROlific foam grip tape.
  • Trucks. Gen2 Prodigy Pro trucks come with Pro Duro Bubble Bushings, locknuts, screws and a mini tool in the box.
  • Wheels. A set of 4.
  • A fingerboard tool that fits your truck screws and locknuts.
  • Optional extras: a graphic wrap, riser pads, board rails or stickers.

Step 1: Apply the tape

Sheets of fingerboard foam grip tape

Peel the backing off the tape and lay it on top of the deck. Make sure it covers the whole top of the board and goes on evenly with no air bubbles. Then use a file along the edges of the deck to shape the tape and file away the extra. Prefer a different feel? See which fingerboard tape to use.

Step 2: Poke the holes through the tape

Flip the deck over and find the 8 truck holes. Use a pin, a truck screw or another thin object to poke each one through the tape from the bottom so the screws can go in cleanly.

Step 3 (optional): Apply a graphic wrap

Applying a graphic wrap to the bottom of a fingerboard deck

If you have a graphic deck wrap, peel off the backing and stick it on the bottom of the deck. Press it down firmly to get rid of air bubbles, file the edges to match the shape of the board, then poke all 8 holes through the wrap.

Step 4: Set up your tuning

If your trucks came with bushings in the box, put them in now, before the trucks go on the deck. The bushings sit on the kingpin and decide how loose or tight your trucks turn. Our bubble bushing install guide walks through it.

Step 5: Screw the trucks onto the deck

Screwing fingerboard trucks onto a deck

Use your tool to screw the trucks into the bottom of the deck. The side of each truck with the bushings and kingpin nut should face inward, toward the other truck. Start all four screws lightly in an X pattern, check that the truck sits flat, then tighten.

Using riser pads? Put the riser pad between the deck and the truck and use the extra long screws that come in the riser pad kit. If your trucks won't stay put, our guide on putting trucks on so they don't fall off covers the fixes.

Step 6: Put on the wheels

Slide a wheel onto each axle and hold it on with a lock nut, tightening it with your tool. Nylon insert lock nuts grip the axle threads, so your wheels stay on while you ride.

Step 7: Add extras and ride

Add board rails to protect your graphic, swap in different Pro Duro Bubble Bushings to change how your trucks feel, or add stickers. Then go ride, and tag us in your clips. We're @teaktuning on most social media.

Rather skip the assembly? PROlific Gen2 Completes come fully assembled and ready to ride out of the box. Want to pick every part? The complete builder shows what fits as you go.

FAQ

What do I need to build a fingerboard?

A deck, a set of trucks and a set of wheels, plus grip tape and a fingerboard tool. Bushings, riser pads and board rails are optional. Every Teak Tuning deck comes with a sheet of PROlific foam grip tape.

Which way do fingerboard trucks face?

The side with the bushings and kingpin nut faces inward, toward the other truck.

What tool do I need to put a fingerboard together?

A fingerboard tool that fits the truck screws and locknuts. Gen2 Prodigy Pro trucks come with a mini tool, and our Repair and Tool Kits have two bigger handle tools that are easier to grip.

Do I put the tape on before the trucks?

With foam tape, yes. Tape the deck and poke the holes through first, then screw the trucks on. With Pro Duro Grip Tape, we recommend putting the trucks on first.

Can I buy a fingerboard that's already assembled?

Yes. PROlific Gen2 Completes come fully assembled and ready to ride out of the box.


2 comments


  • Parker

    Thanks the video is really helpful


  • Jaypreet Singh Sahota

    What are spacer trucks and where do you put pivot cups?


Leave a comment

Please note, comments must be approved before they are published

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.