Session x Teak Halloween Bench - 7.875" Wooden Fingerboard Grind Obstacle, Orange Inlay - Limited Edition

The Build
Every Session x Teak piece starts as a design our own crew rides before it goes into production. We laser cut the parts from high grade Baltic birch plywood, glue and assemble them by hand, then hand sand every edge until the lips and landings feel finished. Every obstacle is handcrafted start to finish in our Rochester, NY shop. Session Fingerboards is part of the Teak Tuning family, and the Session x Teak collaboration line is where our fingerboarding obstacles come from.

Materials and Wear
Baltic birch body under a black top with an orange acrylic TEAK inlay. Scuffs on the top are normal wear. It's light, so hold it or put a bit of tape under the base if your desk is slick.

Care
Keep it dry and indoors. Plywood swells if it sits in moisture, so keep it off damp surfaces and wipe it with a dry cloth. Use a dry cloth on the top and skip solvents and polish, they haze the finish.

Teak Guarantee
Every Session x Teak piece is built by us in Rochester, which means it's backed by the Teak Guarantee: if it arrives damaged, arrives defective, or breaks within 90 days of delivery, we replace it or refund it. Reach out with a photo of the issue. Full guarantee details.

Is the Halloween Bench a limited edition?
Yes. The orange inlay colorway is a Halloween 2026 run, and once it sells out it won't be restocked.

Is it the same size as the regular Bench?
Yes. It's the same 7.875 x 1.75 x 1.75 inch Session x Teak Bench, with a black top and an inlaid TEAK wordmark.

Who makes Session x Teak obstacles?
Session Fingerboards is part of the Teak Tuning family, established in 2025. Every piece in the line is designed, laser cut, glued, and hand sanded start to finish in our Rochester, NY shop.

Is it solid wood?
The body is high grade Baltic birch plywood, laser cut and glued up in house. It's real wood all the way through, so the faces hold their shape session after session.

Will it slide around on a desk?
It's light, so on a slick desk you'll want to steady it or put a bit of tape under the base. On wood or a mat it stays put.

Does it fit all fingerboards?
Yes. These are open riding surfaces scaled for standard fingerboards, so deck width doesn't matter: narrow old school decks, 32mm and 34mm standards, and 36mm and wider shapes all ride the same obstacles.

Do I need to assemble anything?
No. Every obstacle ships fully assembled and padded from our Rochester, NY shop. Unbox it and ride.

What does the Teak Guarantee cover?
Replace or refund within 90 days of delivery for anything that arrives damaged or defective, or breaks in that window. Contact Teak Tuning with a photo, and see the full policy on our Teak Guarantee page.